GET THE LOOK

Seasonal color series to inspire, ignite and invigorate your color business. Handcrafted by the EuforaColor Team, these collections will help you offer something new for your color guests.

Winter 2024 | REDS

step-by-step

REDS

Picture a beautiful landscape at the height of fall foliage. Now transition those vibrant shades to a gorgeous, radiant hair color.  Bright pops of copper and red shades accentuate a lush mahogany base. Guests will turn heads and distract from the fall leaves with these beautiful tones.

?share=copy

BEFORE
Model Starting LevelNatural Level 6, Level 7/8 mids and ends. 

STEP ONE
Global Root and Pre-Sectioning:

A rich base will accentuate the deep red and copper tones of this technique. Apply Global Root Formula 1 to the entire root area and smudge out approximately 3/4 inches from scalp, feathering product to prevent a solid line of demarcation.

Mixing Ratio: 1:1.5 

Global Root Formula10g 5.01/5NA + 10g 5.22/5VV+ 20g 5.6/5R + 60g Universal Cream Developer 20 Volume 6%.

Photo 1:
After Global Root application, carve out a curved crescent (small smile) section from the back of each ear just below the occipital bone. Next, divide the top section in two with a center part from the front hairline to the crescent section and pin each side out of the way.

STEP TWO
Photo 2 I Crescent BaseStart with a smaller crescent sub-section starting at the back nape hairline. Section should be approximately ½ inch at it’s widest point. Pin remaining hair out of the way and apply Crescent Formula 2 to the mids and ends of this section, blending with the base formula for a seamless transition of tone.

Mixing Ratio: 1:1 

Crescent Formula 25g 5.22/5VV + 35g 5.6/5R + 5g Clear Shine Dilute + 45g Universal Cream Developer 20 Volume 6%.

Clear Shine Dilute is not included in the Reds kit.

STEP THREE

Photo 3 I Crescent Balayage: Create a second crescent sub-section above the previous nape section. This section should also be approximately ½ inch at it’s widest point. Apply Crescent Formula 2 in a triangle pattern from the Global Root. Next, paint the Freestyle Clay Lightener Formula 3 onto the mids and ends following the triangle pattern. A slight overlap between formulas will help blend the edges.

Mixing Ratio: 1:1

Freestyle Clay Lightener Formula 3: 40g Freestyle Clay Lightener + 40g Universal Cream Developer 20 Volume 6%.

Note: The target level of lightened sections is 8. Increase developer Volume to 30 Volume 9% or 40 Volume 12% Universal Cream Developer (not in kit) if necessary.

STEP FOUR

Photo 4 I Crescent Dimension: Drop down the final crescent section in the back (should be larger than the previous two sections) and apply the Crescent Dimension Formula 4 to the entire section.

Mixing Ratio: 1:1 

Crescent Dimension Formula 4:15g 7.44/7CC + 15g 6.5/6M + 10g 5.35/5GM + 40g Universal Cream Developer 20 Volume 6%.

STEP FIVE

Photos 5 & 6 I Top Crescent Sections: Starting on the left top section, repeat Steps 3 and 4 continuing the crescent pattern from the back section to the front center section. Be sure to end the front crescent with Step 3, Crescent Balayage for a light face frame.

Repeat on the right top side and process until the Crescent Balayage sections have lifted to desired lightness (Level 8).

STEP SIX

Photo 7 I Toning & Finishing: After processing, rinse hair thoroughly and wash twice to remove any residual color or lightener. Do not condition hair. Apply Toner Formula 5 to the pre-lightened sections of the hair and process for 15 - 20 minutes.

Mixing Ratio: 1:2

Toner Formula 5: 30g 7.44/7CC + 60g Toning Solution Developer 5 Volume 1.5% (not in kit).

After toner develops, rinse hair thoroughly, wash and condition with Eufora hair care products of choice and style as desired.

COLOR

5.01/5NA 
Light Brown Natural Ash

Low Ammonia - Designed for cool grey coverage with added control.

5.22/5VV 

Light Intense Violet Brown

No Ammonia - Intense blue/violet reflection at darker levels.

5.35/5GM 

Light Golden Mahogany Brown

No Ammonia - A blended composition offering a deep, warm richness with a hint of red/violet.

5.6/5R

Light Red Brown

Low Ammonia - A cool based red reflecting more red/red-violet than red/copper.

6.5/6M
Dark Mahogany Blonde

No Ammonia - A rich cool deposit that offers a red/violet reflection.

 

7.44/7CC

Intense Medium Copper Blonde

Low Ammonia - Reflects with increased redness, creating an intense copper/red result.

PRODUCTS

Universal Cream Developer Volume 20 - 6% 
Designed to be precise in performance with exceptional versatility. Buffering fatty emolients from coconut and vegetable extracts work to support hair condition, softness and shine. Available in Volume: 5, 7,10 15, 20, 30, and 40.

Freestyle Clay Lightener 
Achieve up to 6 levels of lift. Ideal for guests with a deeper base wanting a sun-kissed hand-painted effect such as balayage, shatush, and ombré.

.

Summer 2023 | FLIRTY

step-by-step

FLIRTY

The FLIRTY collection is more than a look. Guests will adore the flirtatious results of multi-tonal blonde effects with gorgeous dimension! Toning has never been more subtle, stylish, and sexy!

/4f9d27b98b

BEFORE
Model Starting Level: Natural Level 7 with grown-out highlights. 

Note: If necessary, pre-lighten your guest to prepare the canvas. Concentrate lightness around the face to create added brightness. 

STEP ONE
Shadow Root: A gently darker shadow root will ensure seamless grow-out and set the flirty effect of a naturally sun kissed blonde. 

Mixing Ratio: 1:2 

Shadow Root Formula: 25g 8.01/8NA + 50g Toning Solution Developer 5 Volume 1.5%. 

Photo 1:
Shadow Root Directions: Apply formula to the entire root area and smudge out approximately 3/4 inches from scalp, feathering product to prevent a solid line of demarcation. 

STEP TWO
Multi-Dimensional Toning: The trick to luxurious custom toning is layering toner formulas that melt together for unsurpassed dimension. There will be three sections starting at the top of the head and extending down to the back hairline. 

Photo 2:
Top-Toning Section: The front and top of a flirty blonde will be the lightest and brightest! 

Mixing Ratio: 1:2 

Top-Section Toner Formula: 5g 10.3/10G + 5g 10.12/10AV + 5g Clear Shine Dilute + 30g Toning Solution Developer 5 Volume 1.5%. 

Photo 3:
Top-Section Directions: Starting at the recession of the front hairline, create a zig-zag section that travels around the head with it’s lowest points following the parietal ridge of the head. Apply the Top-Section Toner formula, blend by using your fingers to melt the formula in with the shadow root and “stack” on the top of the head. 

Photo 4: 
Mid-Toning Section: This section provides soft beige blonde tones with a gold/violet reflection for subtle sunny warmth. 

Mixing Ratio: 1:2 

Mid-Section Toner Formula: 10g 8.32/8GV + 10g Clear Shine Dilute + 40g Toning Solution Developer 5 Volume 1.5% 

Mid-Section Directions: Using the top-section as your guide, create deep zig-zags around the head. Extend the bottom of the zigzag from just above the ear on the side front for lightness around the face, to the occipital in the back as the section travels around the head. Apply the Mid-Section Toner formula, blend by using your fingers to melt the formula in with the shadow root. “Stack” the mid section into top to keep it up and out of the way. 

Photos 5 & 6:
Bottom-Section: This will complete the multi-dimensional effect with a slightly darker cappuccino ash base along the bottom back that extends into the mid-section. 

Mixing Ratio: 1:2 Bottom-Section Toner Formula: 10g 8.73/8AG + 10g 8.01/8NA + 40g Toning Solution Developer 5 Volume 1.5%. 

Bottom-Section Directions: Apply Bottom-Section Toner formula with the same techniques as top and mid-section. Process for 15 to 20 minutes, cleanse, condition and style as desired.

COLOR

Clear Shine Dilute 
No Ammonia – Dilutes level and tone of the color formula, resulting in up to one shade lighter reflection (not lift). 

8.01/8NA 
Light Natural Ash Blonde
No Ammonia – Designed for cool reflection with added control. 

8.32/8GV 
Light Beige Blonde
No Ammonia – A blended composition offering a soft cool beige. The violet secondary tone offers subtle control, cooling down the warm gold, reflecting as a soft balanced tone. 

8.73/8AG 
Light Cappuccino Blonde
No Ammonia – A blended composition that offers a soft cool deposit. The gold secondary tone offers warmth to a cool blue/ violet ash tone, reflecting slightly cooler than balanced tone. 

10.12/10AV 
Lightest Ash Violet Blonde
No Ammonia – Exceptional ash/ violet reflection for tonal deposit and control. 

10.3/10G
Lightest Golden Blonde
Reflects a true gold with a hint of copper. Great base for creating more natural copper shades. 

PRODUCTS

Toning Solution Developer Volume 5 - 1.5% 
Designed for use with No Ammonia Shades to tone pre-lightened hair and refresh existing color without lifting natural base. 

9 Level Blue Lightener 
Achieve up to 9 levels of ultra-lightening lift when used with or without foils. Ideal for guests with a lower level base wanting platinum results in one application. 

.

Winter 2023 | INDULGENCE

step-by-step

INDULGENCE

/70f1946cc2

BEFORE
Model Starting Level. Natural Level 6, grown-out blonde balayage.

STEP ONE
Color Prime. Fill the hair to replace missing natural melanin on the previously lightened sections.

Mixing Ratio:
1 : 2

Color Prime Formula:
10 grams 7.3/7G
30 grams 8.42/8CV
80 grams Universal Cream Developer Volume 7 - 2.1% (not included in kit)

Color Prime Directions:
Pre-cleanse hair with Urgent Repair Shampoo or Color Prep Spray. (not included in kit)

Apply mixed formula from mid-lengths to ends and process for 10 minutes. Rinse thoroughly and towel dry.

STEP TWO
Base. Balance and blend new growth.

Mixing Ratio:
1 : 1.5

Base Formula:
20 grams 4.01/4NA
40 grams 5.35/5GM
90 grams Universal Cream Developer 
Volume 15 - 4.5% 

Base Directions:
Apply to the new growth and blend out 1” to 1.5” off the scalp.

STEP THREE
Pull Through. Create contrasting cool and warm tones for reflective opposition that indulgently enhances the cut.

Mixing Ratio:
1 : 1.5

Pull Through Formula 1:
20 grams 5.35/5GM
20 grams 5.4/5C
20 grams 5.66/5RR
90 grams Universal Cream Developer 
Volume 15 - 4.5%

Pull Through Formula 2:
10 grams 5.4/5C
10 grams 7.3/7G
40 grams 8.42/8CV
90 grams Universal Cream Developer 
Volume 15 - 4.5%

PULL THROUGH DIRECTIONS

Pull Through Step 1. Carve out 1” wide section around the hairline. Create large triangle shaped sub-sections in this area following the shapes of the head. Alternate Pull Through Formulas 1 and 2 in each triangle section to accentuate the highs and lows of the tonality in each. 

Pull Through Step 2. Carve out a second ring (that is slightly smaller than the first section) with triangular sub-sections running parallel
to the first 1” section. Repeat application steps from the first step on this new section making sure to alternate colors with each other in opposition to the first section.

Pull Through Step 3. Continue with this placement technique to the top of the head until all hair has been colored. Each section ring, and subsequent triangle sub-sections, will become smaller as they move up to the top of the head. This will help with balanced placement and reflection.

Process for 30 minutes. Rinse and style.

STEP ONE

STEP TWO

STEP THREE - PULL THROUGH

COLOR

4.01/4NA Medium Natural Ash Brown
No Ammonia - Green/Blue/Blue base. Designed for cool grey coverage with added control.

5.35/5GM Light Golden Mahogany Brown
No Ammonia - Gold/Red/Violet base. A blended composition that offers a deep warm richness. The red/violet secondary tone provides a mahogany coolness to this gold base.

5.4/5C Light Copper Brown
Low Ammonia - Copper/Red base. This fiery shade creates a reflection of orange/red.

5.66/5RR Light Intense Red Brown
Low Ammonia - Red base. Reflects a hint of violet (in the red reflection), keeping this shade cool.

7.3/7G Medium Golden Blonde
Low Ammonia - Gold base. Reflects a true gold with a hint of copper. Great base for creating more natural copper shades.

8.42/8CV Light Copper Violet Blonde
No Ammonia - Copper/Violet base. A blended composition that offers a rich, subdued copper tone. The violet secondary tone delivers considerable control, softening this copper-based shade.

PRODUCTS

AloeLite Cream Lightener
Included in this kit for pre-lightening as desired. Achieve up to 6 levels of evenly controlled lift with this creamy lightener. Mixing ratio is 1:2 (one-part lightener to 2-parts developer). Do not use 40 Volume Developer with Cream Lightener.

Universal Cream Developer Volume 15 - 4.5%
Designed to be precise in performance with exceptional versatility. Buffering fatty emollients from coconut and vegetable extracts work to support hair condition, softness and shine. Available in Volume: 5, 7, 10, 15, 20, 30, and 40.

Spring 2023 | ALLURE

step-by-step

ALLURE

An enticing collection of Cappuccino and Mocha richness enhanced with soft warm dimension. Create an alluring tone and style that your color guests will love.

/e283396874

BEFORE
Model Starting Level. Natural Level 7 with grown-out balayage.

STEP ONE
Pre-Lighten. This simple technique sets the stage for gorgeous Rose Ember highlights.

Mixing Ratio:
1 : 2

Pre-lightening Formula:
One part AloeLite Blue Bleaching Powder with two-parts Universal Cream
Developer 10 Volume 3%.

Photo 1:
Pre-Lightening Sectioning:
Starting at the recession of the right front hairline, create a 2.5-3 inch diagonal back section. Using the first section as your guide, create a “V” pattern of slices around the parietal ridge. Clipping up your top section.

Photos 2 & 3: 
Pre-Lightening Application:
Starting with your front, diagonal back section, take a 1/8 inch slice and, using foils, apply lightener. Using this “V” foil pattern, continue the zig zag placement around the entire parietal ridge ending at the opposite front hairline.
Process until you have reached your desired level of lightness. Must be at least level 8, exposing yellow to orange-yellow underlying pigment. Rinse and wash hair, do not condition. Towel dry.

STEP TWO
Smudge Root. This will create a gorgeous juxtaposition of cool and soft balanced tones at the base of the hair offering a soft blend of tones.

Mixing Ratio:
1 : 2

Cool Smudge Root Formula:
30g 6.01/6NA + 60g Universal Cream Developer 10 Volume 3%.

Balanced Smudge Root Formula:
15g 6.01/6NA + 15g 8.73/8AG + 60g Universal Cream Developer 10 Volume 3%.

Photos 4 & 5
Smudge Root:
Starting with a top/center section, apply to the root in the same fashion as you would a base touch-up. Alternate formulas every 2-3 sections following the shape of the head. Be sure to “smudge” your base formula out to create the desired look. Do not rinse, move directly to Step 3.


STEP THREE
Tone Highlights:
This will provide the gorgeous Rose Ember highlight effects.

Mixing Ratio
1 : 2

Rose Ember Toner Formula:
10g 8.2/8V + 10g 8.73/8AG + 40g Universal Cream Developer 10 Volume 3%.

Photos 6 & 7
Rose Ember Toner Directions:
Apply toner formula to all of the highlighted pieces and process for 15 minutes.

Rinse thoroughly, shampoo, condition, and style as desired.

Note:
Steps 2 and 3 should happen simultaneously. Quickly apply the toner formula once the base is applied to prevent over-processing of the base formula.

GREY ROOT COVERAGE

Optional Grey Root Coverage Formulas:
For 100% grey coverage, choose one of the following formulas, or both for a juxtaposition of cool and soft balanced tones. Apply the grey coverage base formula first, then proceed with foil placement as previously described.

Process, rinse and tone.

Mixing Ratio
1 : 1.5

Grey Coverage Balanced Formula:
25g 7.01/7NA + 15g 8.73/8AG + 60g Universal Cream Developer 10 Volume 3%.

Process for 35-45 minutes.

Mixing Ratio
1 : 1.5

Grey Coverage Warm Formula:
20g 6.03/6NW + 20g 6.73/6AG + 60g Universal Cream Developer 10 Volume 3%.

Process for 35-45 minutes.

COLOR

6.01/6NA
Dark Natural Ash Blonde
No Ammonia — Green/Blue/Blue
base. Designed for cool grey
coverage with added control.

6.03/6NW
Dark Natural Warm Blonde
Low Ammonia — Green/Blue/
Gold base. Designed for warm
grey coverage. Excellent base for
Copper and Red grey coverage.

6.73/6AG
Dark Mocha Blonde
No Ammonia — Blue/Violet/Gold
base. A blended composition,
offering a soft cool deposit.
The gold secondary tone offers
warmth to a cool blue/violet ash
tone, reflecting a slightly cooler
than balanced tone.

7.01/7NA
Medium Natural Ash Blonde
Low Ammonia — Green/Blue/
Blue base. Designed for cool grey
coverage with added control.

8.2/8V
Light Violet Blonde
No Ammonia — Blue/Violet base.
Vibrant violet reflection at the
lighter levels.

8.73/8AG
Light Cappuccino Blonde
No Ammonia — Blue/Violet/Gold
base. A blended composition
that offers a soft cool deposit.
The gold secondary tone offers
warmth to a cool blue/violet ash
tone, reflecting a slightly cooler
than balanced tone.

PRODUCTS

Universal Cream Developer 10 Volume 3%
Precise in performance with exceptional versatility.
Buffering fatty emollients from coconut and vegetable
extracts work to support hair condition, softness and
shine. Available in Volume: 5, 7, 10, 15, 20, 30, and 40.

AloeLite Blue Bleaching Powder
Achieve up to 7 levels of lift with this dust-free powder
lightener. Can be used with foils or when performing
global lightening services.